John Deere 2660VT

Blade spacing

18.4 cm
7.25 in.

Horsepower requirement

24.5-34.25 engine kW/m (10-14 engine hp/ft)

Transport width

Three-section: 3.76 m (12 ft, 4 in), 3.76 m (12 ft, 4 in.), 4.27 m (14 ft), and 5.3 m (17 ft, 5 in.)
Five-section: 4.65 m (15 ft, 3 in.) and 4.65 m (15 ft, 3 in.)

Transport height

Three-section: 3.35 m (11 ft), 3.96 m (13 ft), 4.27 m (14 ft), and 4.19 m (13 ft, 9 in.)
Five-section: 3.9 m (12 ft, 10 in.) and 4.34 m (14 ft, 3 in.)

Working depth

Operating speed

12.9-16.1 km/h
8-10 mph
Up to 12.9 km/h (8 mph) in rocky conditions

Standards

Blade spacing

18.4 cm
7.25 in.

Gang angle

0-12 degrees

Front gang blades

Rear gang blades

Weight

Number of blades

Weight per blade

117.9 kg
260 lb

Commander™ blade diameter

Commander™ blade thickness

Blade diameter

55.9 cm
22 in.

Blade thickness

6.5 mm
0.256 in.

Rolling basket

Double Rolling basket, Reverse Knife edge, followed by round bar or flat bar rolling basket

Horsepower requirement

24.5-34.25 engine kW/m (10-14 engine hp/ft)

Transport width

Three-section: 3.76 m (12 ft, 4 in), 3.76 m (12 ft, 4 in.), 4.27 m (14 ft), and 5.3 m (17 ft, 5 in.)
Five-section: 4.65 m (15 ft, 3 in.) and 4.65 m (15 ft, 3 in.)

Transport height

Three-section: 3.35 m (11 ft), 3.96 m (13 ft), 4.27 m (14 ft), and 4.19 m (13 ft, 9 in.)
Five-section: 3.9 m (12 ft, 10 in.) and 4.34 m (14 ft, 3 in.)

Underframe clearance

3.66 m
12 ft

Transport length

Without rear hitch
Three-section: 10.06 m
33 ft
Five-section: 12.19 m
40 ft

Working width

Gang angle at 0 degrees
Three-section: 6.25 m (20 ft, 6 in.), 7.75 m (25 ft, 5 in.), 9.2 m (30 ft, 3 in.), and 10.3 m (33 ft, 10 in.)
Five-section: 13.26 m (43 ft, 6 in.) and 15.1 m (49 ft, 6 in.)

Working depth

Depth control

Single point and TruSet™ system

Maximum operating depth

10.16 cm
4 in.
*Maximum depth may be shallower depending on ground conditions and tire package.

Operating speed

12.9-16.1 km/h
8-10 mph

Note