John Deere 725D

Cutterbar length

7.8 m
25.5 ft

Knife drive

Base: single (combine use only)
Optional: dual knife (combine use only)
Base: dual knife (SPW only or SPW/combine combination use)

Knife speed

490 cycles/min

Pickup reel operating speeds

6-54 rpm
137.2-cm (54-in.) reel: 5-44 rpm

Draper belts speed control

Hydraulic from cab

Type

Straight-line knife drive system

Length

7.8 m
25.5 ft

Knife drive

Base: single (combine use only)
Optional: dual knife (combine use only)
Base: dual knife (SPW only or SPW/combine combination use)

Knife speed

490 cycles/min

Cutterbar tilt

Base: hydraulic, maximum tilt 9 degree (angle)

Base skid shoe height

General

Number of slats

Six bat poly base
Eight bat steel optional (for forage conditions)

Fingers

Base: nylon
Optional: steel (typically used in rice or forage conditions)

Diameter

1.067 m
3.5 ft
For rice or forage conditions: 1.371 m
4.5 ft

Height control

Hydraulic

Speed control

Hydraulic

Reel lift

Cylinder stroke: 33 cm
13 in.
Total range: 39.2 cm
15.4 in.

Reel fore and aft

Cylinder stroke: 35.9 cm
14.1 in.
Total range: 62 cm
24.4 in.

Fore of the cutterbar

Reel resume

Base

Reel reverse

Base

Operating speeds

6-54 rpm

Operating speeds (54-in. reel)

5-44 rpm

Number of slats

Diameter

Height control

Speed control

Operating speeds

Width

Rubber coated polyester with V-Guide tracking: 0.7 L
24 oz
Side belts: 1.02 m
3.33 ft
Center belts: 1.4 m
4.583 ft
Center belt not included with SPW configuration

Belt depth

Cleat height

25.4 mm
1 in.

Operating speed

Side belts: variable up to 223 m/min
735 fpm
Center belts: 212 m/min
695 fpm
Center belt not included with SPW configuration

Speed control

Hydraulic from cab

Center belt reverse

Base: Center belt not included with SPW configuration

Diameter

Two factory-installed options: 356 or 406 mm
14 or 16 in.
Feed drum not included with SPW configuration

Feed drum fingers

Steel, heavy-duty, and round with breakaway notch and retainer
Diameter: 16 mm
0.625 in.

Number of fingers

18

Auger finger platform

Dual chevron, retracting

Finger reach

152 mm
6 in.

Drum/auger reverse

Base

Operating speed

195 rpm

Center cleanout door

Base

Type

Base: electrohydraulic

Header height sensing on the ground

Base

Header height sensing off the ground

Type

Optional: hydraulic drive

Fingered augers

Size

Platform length

8.5 m
27.9 ft

Overall operating depth

2.4 m
7.9 ft

Transport width, field position

8.1 m
26.5 ft

Transport width on wheel, less dividers

Transport length, hitch extended