John Deere 735D
Combine PlatformsSpecs
Make
John Deere
Model
735D
Machine type
Combine Platforms
features
Specifications
Key Specs
Cutterbar length
10.67 m
35 ft
Knife drive
Base: single (combine use only)
Optional: dual knife (combine use only)
Base: dual knife (SPW only or SPW/combine combination use)
Knife speed
490 cycles/min
Pickup reel operating speeds
6-54 rpm
137.2-cm (54-in.) reel: 5-44 rpm
Draper belts speed control
Hydraulic from cab
Platform
Cutterbar
Type
Straight-line knife drive system
Length
10.67 m
35 ft
Knife drive
Base: single (combine use only)
Optional: dual knife (combine use only)
Base: dual knife (SPW only or SPW/combine combination use)
Knife speed
490 cycles/min
Cutterbar tilt
Base: hydraulic, maximum tilt 9 degree (angle)
Base skid shoe height
Pickup reel
General
Number of slats
Base: six bat poly
Optional: eight bat steel (for forage conditions)
Fingers
Base: nylon
Optional: steel (typically used in rice or forage conditions)
Diameter
1.067 m
3.5 ft
For rice or forage conditions: 1.371 m
4.5 ft
Height control
Hydraulic
Speed control
Hydraulic
Reel lift
Cylinder stroke: 330 mm
13 in.
Total range: 391.5 mm
15.4 in.
Reel fore and aft
Cylinder stroke: 359 mm
14.1 in.
Total range: 620 mm
24.4 in.
Fore of the cutterbar
Reel resume
Base
Reel reverse
Base
Operating speeds
6-54 rpm
Operating speeds (54-in. reel)
5-44 rpm
Slat reel
Number of slats
Diameter
Height control
Speed control
Operating speeds
Draper belts
Width
Rubber coated polyester with V-Guide tracking: 0.7 L
24 oz
Side belts: 1.02 m
3.33 ft
Center belts: 1.4 m
4.583 ft
Center belt not included with SPW configuration
Belt depth
Cleat height
25.4 mm
1 in.
Operating speed
Side belts: variable up to 223 m/min
735 fpm
Center belts: 212 m/min
695 fpm
Center belt not included with SPW configuration
Speed control
Hydraulic from cab
Center belt reverse
Base: center belt not included with SPW configuration
Feed drum
Diameter
Two factory-installed options: 356 or 406 mm
14 or 16 in.
Feed drum not included with SPW configuration
Feed drum fingers
Steel, heavy-duty, and round with breakaway notch and retainer
Diameter: 16 mm
0.625 in.
Number of fingers
18
Auger finger platform
Dual chevron, retracting
Finger reach
152 mm
6 in.
Drum/auger reverse
Base
Operating speed
195 rpm
Center cleanout door
Base
Header height sensing
Type
Base: electrohydraulic
Header height sensing on the ground
Base
Header height sensing off the ground
Base
Top auger
Type
Optional: hydraulic drive
Fingered augers
Size
Dimensions
Platform length
11.6 m
37.9 ft
Overall operating depth
2.5 m
8.2 ft
Transport width, field position
11.4 m
37.5 ft
Transport width on wheel, less dividers
2.7 m
8.9 ft
Transport length, hitch extended
13.8 m
45.4 ft
Weight
Additional information
Availability
- Ogallala, NE1 available(308) 284-4049
- Pueblo, CO1 available719.750.3326