John Deere 3046R
Compact Utility TractorSpecs
Make
John Deere
Model
3046R
Machine type
Compact Utility Tractor
features
Specifications
Key Specs
Engine power (gross)
SAE J1995 rated power: 33.3 kW
44.7 hp
45.3 PS at 2600 rpm
Power take-off (PTO) power
25.2 kW
33.9 hp
Steering hydraulics
23.5 L/min
6.2 gpm
Implement hydraulics
34.3 L/min
9.1 gpm
Hitch type
Category 1
Lift capacity, 24-in. behind link arms
995 kg
2194 lb
Standard transmission; forward/reverse
eHydro transmission
Cruise control
Standard
Approximate shipping weight (open-station; cab)
Open operator station (OOS): 1391 kg
3066 lb
Cab: 1818 kg
4008 lb
Wheelbase
1727 mm
68 in.
Engine
Family
Manufacturer
Yanmar®
Engine model
3TNV86CHT-MJTV
Engine power (gross)
SAE J1995 rated power: 33.3 kW
44.7 hp
45.3 PS at 2600 rpm
Power take-off (PTO) power
25.2 kW
33.9 hp
Rated engine speed
2600 rpm
Type
Diesel
Injection pump type
High pressure common rail direct injection
Aspiration
Turbocharged and intercooled
Emissions compliance
Final Tier 4
Cylinders/displacement
Three cylinders: 1.57 L
95.7 cu in.
Number of cylinders
Three
Cylinder liners
Cast-in-block
Bore and stroke
86 x 90 mm
3.4 x 3.54 in.
Compression ratio
19.1:1
Lubrication
Pressurized
Cooling system
Liquid
Air cleaner
Dual element
Engine torque at rated speed
112.3 Nm
90 lb-ft
Fuel tank capacity
OOS: 37.4 L
10 U.S. gal.
Cab only: 47.6 L
12.6 U.S. gal.
Electrical
Battery size
500 CCA
Alternator (12-V)
75 amp
Starter size
1.4 kW
1.9 hp
Fuel system
Type
High pressure common rail direct injection
Fuel consumption
Transmission
Standard transmission; forward/reverse
eHydro transmission
Optional transmission; forward/reverse
Left-hand reverser
Transmission gear ranges
Three-range, infinitely variable
Final drive
Spur gear
Brakes
Wet disk
Steering
Hydrostatic power steering
Clutch, wet/dry
Clutch disk diameter wet clutch
Axle capacity
Front
1450 kg
3197 lb
Rear
1850 kg
4079 lb
Creeper
Cruise control
Standard
Differential lock
Drawbar maximum vertical load
Hydraulics
Type
Open center
Pump rated output
Steering
23.5 L/min
6.2 gpm
Implement
34.3 L/min
9.1 gpm
57.8 L/min
15.3 gpm
Pump type
Single gear
Maximum operating pressure
172 bar
2495 psi
Draft control sensing
Position control
Remote control valves available
Up to six rear remotes
3-point hitch
Type
Category 1
Lift capacity, 24-in. behind link arms
995 kg
2194 lb
Power take-off (PTO)
Standard
Independent rear: 540 rpm
Optional
Mid: 2100 rpm
Control
Lever and switch
Clutch
Wet disk
Brake (for mid and rear PTO)
Wet disk
Engagement method
Fluid capacities
Crankcase with filter
5.7 L
6 gal.
Transmission and hydraulic system
26.5 L
7 U.S. gal.
Final drive
Type
Spur gear
Differential lock
Operator station
Rollover protective structure
Type
Foldable
Platform - flat/straddle
One-piece semi flat
Gear shift location - console/floor
Cab
Compliance
Complies with OSHA, SAE, and CSA standards for rollover protection
Visibility
360 degree (angle)
Air conditioning, temperature differential
Doors
Two
Noise rating
80 dBA
Seat equipment
Scissor-link
Dimensions
Height
Wheelbase
1727 mm
68 in.
Front axle clearance
Minimum: 171 mm
6.7 in.
Maximum: 299 mm
11.8 in.
Turning radius with brakes
2.7 m
8.8 ft
Turning radius without brakes
2.8 m
9.2 ft
Limited slip differential
Approximate shipping weight (open-station; cab)
OOS: 1391 kg
3066 lb
Cab: 1818 kg
4008 lb
Tires
Front
R1 Bar: 7-14
R3 Turf : 27x8.50-15
R3 Turf Special: 25/10.5LLx15
R4 Industrial: 25x8.5-14 or 27x8.5-15
Rear
R1 Bar: 11.2-24
R3 Turf: 41x14-20
R3 Turf Special: 41x18LL-16.1
R4 Industrial: 15-19.5 or 43x16-20
Front tread range
1117 mm
44 in.
Rear tread spacing
1031 mm
40.6 in.
Miscellaneous
Toolbox
Tilt steering wheel
12-V Outlet
Additional information
Availability
- Ogallala, NE1 available(308) 284-4049
- Pueblo West, CO1 available(719) 547-3505